Name: Servo motor loading test system
Model Number: CMT-1030SM
Product introduction:
CMT-1030SM servo motor loading test system mainly uses hysteresis dynamometer to detect servo motor and stepper motor T-N curve and maximum stall point. The speed of the motor is controlled by the motor driver, and the locked-rotor torque is measured at different speeds of the motor through hysteresis dynamometer loading, and the PN curve is plotted. The load can be adjusted at a high speed to achieve continuous load change loading. Actual test conditions change.
General parameter measurement
1. Electrical parameters: motor operating voltage, current, power factor, input power, resistance;
2. Mechanical parameters: motor running speed, torque, mechanical power;
3. Other parameters: motor efficiency, temperature.
• Load characteristics and endurance tests
• T-N curve and five-axis diagram
• No-load and Lock rotor test
• Driver voltage current and efficiency test
• Drive dynamic response test and analog load characteristic test
Selection reference
| Controller model | Sampling speed | Available Communication Protocol | Communication Method | Providing Test Software | Features |
| HDC-1010 | 5-10PCS/S | Yes | RS-232 | no | Simple operation, low price, suitable for ordinary production lines |
| HDC-1010-S | 5-10PCS/S | Yes | RS-232 | Yes |
| HDC-1020 | 20PCS/S | no | USB2.0 | Yes | Fast collection speed and wide test range, suitable for common production lines and common experiments |
| HDC-1030 | 25PCS/S | no | USB2.0 | Yes |
| HDC-1040 | 100PCS/S | no | GPIB/RS232 | Yes | Fast acquisition speed, wide test range and strong anti-interference performance, suitable for production lines and laboratories with high requirements |
| HDC-2010 | 100PCS/S | no | GPIB/RS232 | Yes |
Software introduction
TN curve test setting interface
Configuration
| No. | Component | Technical requirements |
| 1 | Dynamometer controller | HDC-1030 controller adopts RS-232 communication and high communication speed. |
| 2 | Industrial Control Computer with 19" Monitor | Inter CPU; 4G or above running memory; 500G or above hard disk ASUS motherboard. |
| 3 | Electrical parameter tester | Single-phase AC/DC parameters instrument, maximum detection voltage 600V, voltage 50A |
| 4 | Dynamometer | Natural cooling; torque 1.2KG ~ 6Kg.cm, torque accuracy ± 0.5% FS full scale; speed 10 ~ 3600rpm, speed accuracy ± 0.2% FS full scale. Short-term (in 5 minutes) operating power of 1400W, long-time operating power of 300W. |
| 5 | Dynamometer | Natural cooling; Torque 0.6 ~ 3Kg.cm, torque accuracy ± 0.5% FS full scale; speed 10 ~ 3600rpm, speed accuracy ± 0.2% FS full scale. Short-term (in 5 minutes) operating power of 1400W, long-time operating power of 300W. |
| 6 | Dynamometer | Natural cooling; torque 100g ~ 500g.cm, torque accuracy ± 0.5% FS full scale; speed 100 ~ 25000rpm, speed accuracy ± 0.2% FS full scale. Short-term (in 5 minutes) operating power of 1400W, long-time operating power of 300W. |
| 7 | Cabinet | L600*W600*H1015 |
| 8 | Signal converter | Connect three dynamometers and manually select the dynamometer to be used. The system will automatically convert all signals. |
| 9 | Motor fixture | Can be adjusted up and down |
| 10 | Motor Test System | Chinese interface; with manual loading, automatic loading, fixed-point torque testing, full-scale testing and other functions, can output and save data reports and curve report functions. If you need to customize the report form, please provide the corresponding template. If not provided, export the report according to our default template. |
Product Tags:
|
|
Servo Motor Load Test Equipment / Loading Test System L600*W600*H1015 Cabinet Images
|
